Use:
Product function: pH regulation
Alca-Plus increases the alkalinity of the water (TAC value) and
stabilises the pH.
Product description:
Granules with a basic pH
Instructions for use:
- Test alkalinity (TAC value) at least once a year.
year. The ideal alkalinity is between 80 and 120 mg/L (8 and 10 °F).
At these values, flocculation is optimised and flocculation is avoided.
strong pH fluctuations.
- Dose Alca-Plus directly into the pool water,
with the filtration system in operation.
- After treatment, leave the filtration system running for a few minutes.
2 to 3 hours, analyse the TAC value and readjust it if necessary.
necessary.
- In the case of automatic equipment, the CT scanner shall
should approximate 150 mg/L (15ºF); and while the
Alca-Plus dosing should be interrupted
pH regulation.
Recommendations:
Filtration must run every day (at least one day).
time equal to the water temperature divided by 2). Perform this
treatment preferably in the evening, after the last bath.
of the day. After dosing Alca-Plus, it may be necessary to
acid pH correction. To prevent the water from becoming cloudy, do not dose
more than 500 g per 10 m3
of water.
Reviews
There are no reviews yet.